top of page

Fixing Brick Slips on Plasterboard: A Step-by-Step Guide


Putting brick slips on plasterboard can give your room a rustic look. Whether you're a professional or someone who likes to do their projects, this detailed guide will show you how to fix brick slips on plasterboard. Get ready for this striking design to change the look of your room!

Fixing brick slips on plasterboard

Materials You'll Need for fixing brick slips on plasterboard

Before we get started on the steps, ensure that you have the necessary materials:



● Measuring tape

● Spirit level

● Pencil

● Trowel

● Tile spacers

● Notched adhesive trowel

● Bucket for mixing adhesive

● Brick slips

● Plasterboard

● Adhesive suitable for brick slips

● Grout

● Sealant

Step 1: Prepare the Surface

To begin, you need to ensure that the surface of your plasterboard is clean and dry. Clean out any dirt, dust, or remnants of old adhesive. This phase is essential to achieving the desired level of adhesion.


Step 2: Measure and Plan

Measure the area where you intend to lay the brick slips. Marking the layout with your measuring tape, spirit level, and pencil will ensure straightness and levelness. Create a blueprint of the pattern you want to make.


Step 3: Mix the Adhesive

Following the manufacturer's instructions when you mix the glue in a bucket. You should make sure it's the right consistency. If it's too thick or too thin, it could lead to problems in the future.


Step 4: Apply the Adhesive

It is necessary to use a notched adhesive tool to spread the glue evenly on the plasterboard. In particular, look at the sides and corners to ensure the coverage is equal everywhere.

Step 5: Place the Brick Slips

Once you have a layout plan, carefully place the brick slips on the adhesive following your plan. Tile spacers will help you keep the gaps between the tiles even. Put some pressure on each slip when you stick it to the adhesive.


Step 6: Check for Level

Check the brick slips often with the spirit level to ensure they are level and in the right place. Make any changes that need to be made before the glue sets.


Step 7: Grouting

When the adhesive has reached the appropriate level of dryness, you can then remove the tile spacers and get ready to grout. Please fill up the spaces between the brick slips by applying grout between them. You can use a grout float to press the grout into place and remove any excess.


Step 8: Clean-Up

While the grout is still wet, clean the brick slips of any excess grout that may have been applied. To get a smooth finish, you must be careful with this step.


Step 9: Seal the Brick Slips

While the grout is still wet, clean the brick slips of any excess grout that may have been applied. To get a smooth finish, you must be careful with this step.


Congratulations! You've done a fantastic job of fixing brick slips on the plasterboard, which has resulted in adding a great design feature to your area. This striking makeover will leave a lasting impression on everyone who steps inside your home.

Final Thoughts

This guide clearly shows you how to fix brick slips on plasterboard. You can make something that looks professional if you follow these steps and use the right tools. This project is a great way to gain inspiration to improve the look of your living room, kitchen, or any other room.

Now, you can change the look of your room with the classic beauty of brick slips on plasterboard. Have fun with your new, interesting design!


Featured Posts
Other Posts
bottom of page